Zephyr Mounting Shelf Kit

If you have a Digitrax Zephyr DCS-51 and want to mount it on the fascia of your layout, this is the shelf for you. This kit was designed around the older DCS-51, but it also fits the newer DCS-52.

This is a kit, some assembly is required. You will need glue (white or wood) and some clamps.

NOTE the throttle is not included, it is shown for fit and example purposes only.

Partially assembled Mounting Shelf with a DCS-52 on it to show that the DCS-52 fits on the shlef.

How to Assembly the Zephyr Shelf

NOTE: Click on any image to open a larger copy into a new tab of your browser.

We recommend you dry assemble the shelf before adding any glue.

Layout the pieces as show in the image. There are two back pieces, an inner and an outer. There are four side pieces, two inner and two outer. There are two bottom pieces, an inner and an outer.
Slip the two inner sides onto the inner bottom piece, then slip the inner back piece onto the assembly.
Apply glue to the outside of the inner sides then add the outter sides. Clamp them in place and let the assembly dry.
Now apply gule to the outside of the inner back, add the outter back, clamp and let dry. Apply glue to the outside of the inner bottom, add the outer bottom, clamp and let dry.
When the glue is dry, the Zephyr Shelf is ready to use. Depending on your use, you can paint, oil, or use as is.

Throttle Holder compatible with ISE Proto Throttle

Throttle Holder compatible with Digitrax Throttles

Ordering

To place an order send an email to orders@prawndesigns.com . Include a list of what you want to order (Part Number and Description) and your shipping address. We will get back to you with an estimate of when we will have your order is ready to ship and shipping costs.

Some items are available in the Prawn Designs Etsy Store.

Please read the Laser Cutting and Engraving FAQ page for details on laser cutting and engraving side effects.

Part Number	Title and Description	Price
Throttle Holder
PD-21058	Throttle Holder Kit compatible with ISE Proto Throttle Kit Throttle Holder Kit, compatible with the ISE ProtoThrottle. It was designed to fit your ProtoThrottle perfectly.	$15.00
PD-21060	Throttle Holder Engraving Kit Have your ISE Proto Throttle Face Plate custom Engraved with your Logo and Railroad Name.	$20.00
PD-21059	Throttle Holder Kit compatible with ISE Proto Throttle (Pair) Kit A pair of Throttle Holder Kits, compatible with the ISE ProtoThrottle. It was designed to fit your ProtoThrottle perfectly.	$28.00
PD-21061	Throttle Holder Engraving (Pair) Kit	$36.00
PD-21075	Zephyr Mounting Shelf Kit If you have a Digitrax Zephyr DCS-51 and want to mount it on the fascia of your layout, this is the shelf for you.	$20.00
PD-21095	Throttle Holder Digitrax DT602D Kit A throttle holder that is compatible with a Digitrax DT600 series throttle.	$15.00
PD-21097	Throttle Holder with Wings Digitrax DT602D KIT A throttle holder that is compatible with a Digitrax DT600 series throttle with wing so it can be clamped onto the side of module or placed temporarily.	$18.00