Prawn Designs Logo


Board Game Accessories - Prototype Model Trains - Custom Cutting and Engraving

Board Game Accessories

Accessory Game Boards

Board Gamer's Survival Kit

Bases, Bits, Tokens; Coins

Box Inserts

Card Trays

Custom Game Boxes

Dice, Custom

Dice Towers

Dwellings of Eldervale Player Tray Covers

Spin Counters

Eldritch Horror Monster Tray

Flash Point Fire Rescue

RPG Trees

Survive Escape from Atlantis! Custom Expansion Kit


Price List

Information, Tips, Tricks and FAQ

About Prawn Designs


Bases, Bits, Tokens and Coins

Base, Bits and Coins are generic bits (tokens, chits, markers, coins) that can be used in games or as figure bases.

Do you need a special shaped bit or base? I can make just about any shaped Base or Bit. I can make them out of Baltic Birch Plywood, Acrylic, Mat Board, New Board or Card Stock.

Please read the Laser Cutting and Engraving FAQ page for more details on laser cutting and side effects.


Material

There are a number of good materials to make basesm bits and tokens out of. They include but are not limited to

Here is a more comprehesive list of Laser Cutting Materials.


Round (Coins)

Bases-and-Bits Round
0.75 (3/4) inches
Bases-and-Bits Round
1.00 inches
Bases-and-Bits Round
1.125 (1 1/8) inches
Bases-and-Bits Round
1.50 (1 1/2) inches
Bases-and-Bits Round
3.50 (3 1/2) inches

Oblong

Bases-and-Bits Oblong
0.75 X 1.50
(3/4 X 1 1/2) inches
Bases-and-Bits Oblong
1.00 X 2.00 inches
Bases-and-Bits Oblong
1.25 X 2.50
(1 1/4 X 2 1/2) inches
Bases-and-Bits Oblong
1.50 X 3.00
(1 1/2 X 3) inches

Oval

Bases-and-Bits Oval
1.00 X 2.00
(1 X 2) inches

Hex

Bases-and-Bits Hex
1 inch

Square and Rectangle


Miscellaneous

"Y" Token
"Y" Token Long
Half Round
Hex with Bumps
House
Keyhole
1.25 (1 1/4) inch
Round with Bump
Red Acrylic Hearts
Ladders
Lightning Bolt Tokens

Engraved

You can add custom engraving to a token.

The following samples are all 1.5" round tokens. These are examples of the price difference due to the complexity of the graphics. With the raster graphics the most important things is the coverage from top to bottom. The prices are estimates to be used for estimating, actual prices will vary. I do offer volume discounts, it cost me less to make 25 than 1; discoutns are on a case by case basis.

Prices are estimates for compression purposes. An estimate and quote will be made for each order.

Coin with engraved image
Simple vector line art
$0.20
Coin with engraved image
Vector line art with
circle boarder
$0.25
Coin with engraved image
Simple Raster Graphic
$0.65
Coin with engraved image
Simple Raster Graphic
with a Vector boarder
$0.68
Coin with engraved image
About 90%
raster graphic
$0.90
Coin with engraved image
100% coverage
raster graphic.
$1.00
Coin with engraved image
Simple Vector Graphic
$0.27
Coin with one line of Text
Two lines of text
$0.33
Coin with three lines of text
Three line of text
$0.38
Token Set 1st Player, Cry Baby, Longest Turn, Target Player
Token Set 1st Player,
Cry Baby, LongestTurn,
Target Player - $3.00

3D Tokens

3D Tokens come as a kit, upper and lower pieces.

3D Smoke Token
3D Smoke Token
3D Smoke Token Parts
3D Smoke Token Parts
3D Fire Token
3D Fire Token
3D Fire Token Parts
3D Fire Token Parts

Hex Set for Pocket CIV

Cut from 1/8" Baltic Birch Plywood. The hexes measure 1.5 inches across the flats. This token set comes in raw wood ready for you to paint. Pictures coming...


Lightning Bolt Token Set

Lightning Bolt tokens cut from 3/16" Translucent Green Acrylic (other colors available on request). The tokens measure 1" from tip tp tip.

Perfect for use in games like King of Tokyo © IELLO USA

Token Lightning Bolt




Ordering

To place an order send an email to orders@prawndesigns.com . Include a list of what you want to order (Part Number and Description) and your shipping address. We will get back to you with an estimate of when we will have your order is ready to ship and shipping costs.

Some items are available in the Prawn Designs Etsy Store.

Please read the Laser Cutting and Engraving FAQ page for details on laser cutting and engraving side effects.

Shipping

I normally ship via Unites States Postal Service Flat Rate Boxes. It is easy and quick. The bad news is for a small item it can be expensive. The good news is you can fit a fair number of Bases and Bits into a Samll Fat Rate Box (over 100 1.5" round) and way more into a Medium Flat Rate Box. I can also ship via stadard US mail, it is a little cheaper, but not by much.


Price List


Part Number Title and Description Price Image

none

Round (Coins)

Round bases or bits.
Quote for custom sizes are available upon request.
Quantity discounts available.

0.50" $0.08
0.75" $0.10
1.00" $0.15
1.25" $0.18
1.50" $0.20
2.00" $0.24
2.50" $0.30
3.00" $0.40
Round Bases and Bits

none

Oblong

Oblong bases or bits.
Quote for custom sizes are available upon request.
Quantity discounts available.

0.75"X1.5" $0.18
1.0"X2.0" $
1.5"X3.0" $0.35
Oblong bases or bits

none

Oval

Oval bases or bits.
Quote for custom sizes are available upon request.
Quantity discounts available.

1.0"X2.0" $0.22 Oval bases or bits

none

Hex

Hex bases or bits.
Hexes are measured across the flats from one side to the opposite side.

1.0" Hex
$0.11 each
10 or more $0.10 each
Hex bases or bits

none

Square and Rectangle

Square and Rectangle bases and bits.

$ Square and Rectangle Bases and Bits

none

Miscellaneous

Odd shapes and sizes.

Price Varies Odd shapes and sized Bases and Bits

PD-11069

HeartsMiscellaneous - Hearts

Hearts (18) red acrylic, perfect for use with AEG Love Letter .

$2.00 Hearts

PD-11065

Miscellaneous - Ladders

Ladder cut from 1/8" Baltic Birch. Two piece ladders, upper and lower section. Set of 4 ladders, 8 pieces.

$?.?? Hearts

none

Engraving

Custom engraving on bases and bits.

Price Varies Custom engraving on bases and bits

PD-11072

3D Smoke

There are three different "top" and three different "bottom" pieces. With three different tops and bottoms there are 9 different possible combinations. 3D Smoke tokens come as parts, assemble and gluing is required.

The lower image shows the 6 individual shapes. Acrylic comes with a protective paper on it. Parts ship with the protective paper on them.

There is a minimum order of three tokens.

PD-11073 set of 36

$0.65 Each
or
36 for $21.00
3D Smoke Tokens 3D Smoke Tokens Parts

PD-11070

3D Fire

There are three different "top" and three different "bottom" pieces in three different colors each. This makes a total of 81 different possible combinations. 3D Fire tokens come as parts, assemble and gluing is required.

The lower image shows the 6 individual shapes. Acrylic comes with a protective paper on it. Parts ship with the protective paper on them.

There is a minimum order of three tokens of any one color.

PD-11071 set of 36

$0.90 Each
or
36 for $29.00
3D Fire Tokens 3D Fire Tokens Parts

PD-11064

3D Smoke and Fire

A set of 36 Smoke and 36 Fire 3D tokens.

Three different "top" and three different "bottom" parts for the Smoke.

There are three different "top" shapes and three different "bottom" shapes for the Fire, each in three different colors for a total of nine different "top" and nine different "bottom" pieces.

72 total tokens, 36 smoke and 36 Fire for $48.00 3D Smoke Tokens 3D Fire Tokens

PD-11079

Lightning Bolt Tokens

A set of 50 Lightning Bolt tokens. Each token is approximately 1" long.

The grid in the picture to the right is 1".

$10.00 Token Lightning Bolt

PD-11084

Hex Set for Pocket CIV

A set of hex tokens for Pocket CIV. Cut from 1/8" Baltic Birch Plywood. The hexes measure 1.5 inches across the flats. This token set comes in raw wood ready for you to paint.

$14.00 Pictures coming...



Ordering

To place an order send an email to orders@prawndesigns.com . Include a list of what you want to order (Part Number and Description) and your shipping address. We will get back to you with an estimate of when we will have your order is ready to ship and shipping costs.

Some items are available in the Prawn Designs Etsy Store.

Please read the Laser Cutting and Engraving FAQ page for details on laser cutting and engraving side effects.


Disclaimer: This is an accessory for the game, not a replacement. You will need to have a copy of the game to play. This project is in no way affiliated or endorsed by the publishers or trademark holders of the game.